You'll Never Guess This Immobiliser Ghost's Benefits

The Ghost Immobiliser

Immobilisers are a potent weapon in the fight against car theft. They prevent the car from being started without a key fob. They also can be used to stop hotwiring and other traditional methods of vehicle theft. However, newer methods like key replication and relay theft are becoming more common.

To combat these latest trends The ghost immobiliser works to make your vehicle undetectable. It is silent and stealthy and does not rely on key fobs, radio signals or LED indicators.

Easy to install

The Ghost Immobiliser is a revolutionary device, connects to the CAN data network of your vehicle in order to prevent key cloning or theft. It is a TASSA-approved device and insurance companies have endorsed it. It operates quietly and is almost undetectable to thieves. It uses buttons in your steering wheel, centre console and door panels to create a unique pin code that must be entered prior to being able to start your car. You can create up to 20 different sequences to provide greater security. The system is easy to install and doesn't require additional hardware.

It is recommended that you use an authorised installer of CAN immobilisers that is skilled in your specific vehicle type to ensure the most effective results. Ideally, they'll have a workshop near you where you can go to have your installation completed. They'll also have a variety of tools and equipment to aid you with the installation process. These include hand tools, a multimeter and insulation tape as well as heat shrink tubing to protect the connections. A user manual will provide instructions specific to the wiring in your vehicle.

Connect the battery prior to beginning the installation to prevent short circuits or airbag deployment.  ghost 11 immobiliser -checking the CAN L and CAN H wires is crucial because a mistake in identification could cause a misalignment of the system. It is also a good idea to label or mark the wires. Make use of a multimeter to ensure that the power source is providing a constant 12V.

Advanced thieves can use various tactics to bypass Ghost Immobilisers, including blocking or spoofing. These methods work by amplifying the signal transmitted from your key fob to the electronic control unit in your vehicle. With advanced anti-jamming technologies and vigilant monitoring your vehicle will be protected from these sophisticated attacks.

Increased security

A ghost immobiliser offers an additional layer of security to guard your car from theft. It is an PIN code protection system that is operated by using buttons that are already on your steering wheel or dashboard which makes it difficult for thieves to gain access the device and take your vehicle. The device is also designed to be hidden inside your vehicle, with no LEDs or other signals that would alert a potential thief to its presence. It is directly connected to the ECU of your car through the data bus. This means it is not vulnerable to hacking or relay attacks.

It's a great investment for those with expensive automobiles, which are at higher chance of being stolen due to their price and the popularity of their vehicles. Its security features are enhanced to protect against key duplicates, ECU swapping, and other threats to your vehicle's security. Ghost immobilisers can be connected to an app, allowing you can easily arm and disarm them. They can be equipped with a service/valet option that allows you temporarily deactivate the immobiliser while your vehicle is undergoing repairs or maintenance.

Another great feature of a ghost immobiliser is that it does not require any wire cutting. This is a great feature, especially if have a newer car which does not come with immobiliser built-in technology. Some systems can also integrate with GPS tracking devices, adding additional security to your vehicle. A GPS tracker may also reduce the cost of insurance. If you choose to buy a ghost immobiliser, ensure that it is TASSA-verified and that a professional installer installs the device for you.

Compatible with all major brands and models

The Ghost Immobiliser has been designed to work with all major brands and models of vehicles that will protect your vehicle from theft. It utilizes buttons on your steering wheel, the centre console or door panels to generate a unique pin code that must be entered before you can drive your vehicle. The system is tamper-proof and undetectable, and is backed by three-year guarantee. It is also fully endorsed by insurance companies. This means that you can lower your insurance costs.

Unlike the standard immobilisers, which use your key fob to control the ignition of your car and ignition, the Ghost system works by connecting directly with the engine controller unit via the CAN data bus. It is almost impossible to remove, disable or hack. The Ghost system can also be linked to an iPhone app to allow remote monitoring and management.

You can set a PIN code that is simple to remember, but mathematically impossible for thieves to figure out. The PIN can be customized and changed at any point so that you can keep your vehicle safe even when it's parked on the streets or in a public parking lot. You can also choose the valet or service mode if you need someone else to drive your vehicle for a short period for instance, when it is in the garage. This feature will also help to prevent your car from being taken by a dishonest mechanic. You can choose the Ghost Call alert to give you extra peace of mind. It will notify you when your car is moving or has been moved.

Convenience

The ghost immobiliser is an effective security system, securing your vehicle against common theft methods such as key cloning, key stealing and relay attacks. It works by connecting with the car's CAN data network and preventing communication with the engine ECU. This makes it impossible for thieves to duplicate or hack your car, making the installation of this system a good idea for any driver.

Once installed, you'll have to enter a PIN up to 20 digits in length using the buttons on the dashboard as well as the steering wheel to begin the car. The system is completely hidden, and therefore undetectable by thieves. It does not emit radio frequency signals. It can be set up with a PIN code that is user-changeable, adding to its security. The system is also designed to stop cutting the circuit, making it virtually impossible to hack into.

Certain systems let you communicate directly with the immobiliser via an app on your smartphone, disarming it immediately if you forget your PIN. Some come with an option for service or valet that allows you to start your car temporarily, for instance, when you need to drop it off for servicing or valet parking.

The Ghost Immobiliser also is undetectable by thieves since it doesn't transmit radio signals. This is a major benefit over other security systems that are sold aftermarket. Additionally, it is easy to use and doesn't require any complex wiring. You can also use it together with a dash cam for added safety. Dash cam Thinkware F70 features clear and sharp 1080p HD footage, Format Free Technology, and parking mode. The system can also be hardwired to ensure optimal performance and longevity.

Installation

It is essential to select the most reliable immobiliser ghost in order to shield your vehicle from thieves. This device can prevent car thefts by preventing the communication between key fobs as well as the engine controller unit. This prevents thieves from intercepting the signal and copying the key fob to begin your car. It also can detect if it has been tampered and alert the vehicle owner.

The device is simple to install and integrates with the existing systems of your vehicle. It doesn't require any modifications to the wiring in your vehicle and can be hidden in a concealed location, such as under the dashboard. Follow the directions in the manual to make sure that the device is properly installed. It is also crucial to test the system following installing it. This will ensure the ghost of the immobiliser works as it should.

You can purchase an Autowatch Ghost 2 immobiliser and have it installed by a certified installer. The installer will connect Ghost to your vehicle's CAN Bus system, making it harder for thieves to remove the system or bypass it. Installation typically takes between 2 and 3 hours.

It is recommended to look up the wiring diagram of your vehicle prior to the installation process. This will help you identify the CAN High & Low wires. Low wires required to connect your Ghost to the engine of your vehicle. Check all connections to ensure that they're secure and insulated.

Once the installation is completed and you are able to use the Ghost Immobiliser during normal operation. It will turn off your vehicle's ignition if it is not started using the correct PIN, which you can set yourself. The ghost of the immobiliser can be set to Service/Valet Mode in case you need your vehicle to be serviced or valet-parked.